Choosing a Music Streaming Site

Internet becomes a vital thing these years, especially we are asked to work from home due to COVID-19. That’s said, having a fast Wi-Fi connection is essential to support our work productivity in our home. Installing a Sterke router will be a great help to make sure your internet connection is fast and stable. However, if you are using another Wi-Fi router and it’s problematic with the slow connection, you should fix it as soon as possible. In this article, I wrote five tips to fix a slow Wi-Fi connection.

Find the Best Spot, Coverage, and Antenna angle

Perhaps what’s going on with the home wireless network is the layout of the house and where the router sends the waves. To increase the range, experiment with the entire device as well as your antenna. This is the simplest method that does not require an excessive amount of time, money, or special understanding. It is worth changing the location of the router, if it is in a corner of the region, closet (especially metal – it greatly simplifies the signal, along with concrete walls). It may also be useful to reposition the router’s antenna – to learn more about it, search the Internet for the method of propagation of router signals. But back to sensitive signals, the vast majority of routers get the best signal when the antenna is still at full capacity.

Set Up a Good Channel

A Wi-Fi network operates on a series of narrow bands called radio rings. There are a few channels; there are multiple devices that want to use them. As a result, the most popular set – 2.4 GHz – can be blocked by local networks and other devices. This is perhaps similar to the way the navigation system selects the route with traffic. Routers do a great job here, but you can still help them. For example, you can set your router to automatically find and place the least obstructed channels.

Set Up to 5 GHz for Better Performance

Older versions of routers and more frugal brands don’t support 5 GHz, so we get significantly less noise and higher transmission speeds. Switching to Wi-Fi 5 may only be noticed if you have many devices in your home that need a robust wireless network. However, keep in mind that switching to 5 GHz is not a recipe for everyone. The price of a larger frequency is faster signal attenuation depending on distance, and in large apartments or homes, the burgeoning range may very well fail.

Use Wired System

We’re so used to the simplicity of a Wi-Fi program that we forget about that wonderful old cable. Connecting to the web via cable is often the easiest and least expensive option and eliminates the problems associated with Wi-Fi programs. Using a wired connection has two advantages. First, it eliminates remote problems where the wireless signal is not strong enough. Then, it improves the quality of the wireless connection of several devices when at least a handful of them are combined with a cable.

Set a Mesh System

The location of the wireless signal can also be increased in several ways. For example, signal amplifiers can be installed or the router’s antenna can be replaced with another (you’d be surprised how poor the antenna quality of a standard home router is, even though it looks impressive). However, if system device management isn’t your favorite thing to do, it’s best to buy a ready-made kit that allows you to set up a system. These kits are offered by the vast majority of network device manufacturers. With this method, the size of the area covered by the Wi-Fi process is up to you – you just have to pay extra, but you don’t need to invest in the best areas. Some manufacturers offer routers that support this option by default, after which you only need to buy a few low-cost access points.